The POWERMATIC® WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4. Its automatically adjusting, chain drive gear box powers the 3" diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. The WP2510 Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute.

• Helical head with four sided inserts
• Dust hood with 5" diameter dust port
• Segmented infeed rollers
• Segmented chip breakers
• Tool kit with pneumatic screwdriver for removing the cutterhead insert blades
• Part Number 1791303
• Maximum Planing 25 "
• Maximum Planing Thickness 9 "
• Maximum Full Width Depth of Cut 1/8 "
• Maximum Depth of Cut ¼ "
• Minimum Planing Length 10 "
• Cutterhead Diameter 3 3/8 "
• Cutterhead Speed 5000 RPM
• Cuts Per Minute 30000
• Feed Rate 20, 25 and 30 FPM
• Outfeed Roller Diameter 3 "
• Number of Knives 174 Four-sided inserts
• Table Size 32 3/16" x 26"
• Dust Port Diameter 5 "
• Dust Collection Minimum CFM Required 600 cu.ft/min
• Bed Rollers Adjustable from Front 0 " to 0.05 "
• Readout Scale inch/ metric
• Segmented Infeed Roller Diameter 3 "
• Table Height Adjust Manual 1 Turn = 1/32"
• Table Support 2 column
• Tool Supplied tool kit
• Column Diameter 2½ "
• Maximum Height of Rollers Parallel to Tabletop 0.05 "
• Rollers 1 infeed, 2 outfeed
• Motor Power 15 HP
• Motor Phase 3 Ph
• Motor Voltage 230 V
• Prewired 230 V
• Model Number WP2510
• Brand Powermatic
• Overall Dimensions 52 x 36 x 59
• Height 59 inch
• Width 36 inch
• Length 52 inch
• Net Weight 1725 pound

WARRANTY AND SERVICE

JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.