Edge Sanders

You are here:Home > New Woodworking > Sanders > Edge Sanders

Sort By:

Page of 1


Laguna 6-89T, 6" x 89" Edge Sander Our Price: $1,499.00		JET OES-80CS, 6" x 89" Oscillating Edge Sander List Price: $1,904.00 Our Price: $1,549.99 You save $354.01!		Powermatic OES9138 Oscillating Edge Sander (1 Ph., 230V) List Price: $8,059.00 Our Price: $6,559.99 You save $1,499.01!

The Laguna model 6\|89T Edge Sander is a horizontal/vertical sanding machine with swing function of the sanding belt. It features a 10” x 12” end table with dust shroud, a footprint of only 51” x 20” x 45”, and a belt speed of as high as 3,900 RPM		The JET Oscillating Edge Sander has the accuracy and durability you need, in one exceptionally well designed machine. Edge, face, bevel, and contour sanding are at your fingertips - with the power for big jobs and control for fine work; all with the power and durability you’ve come to expect from JET.		The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.


Powermatic OES9138 Oscillating Edge Sander (3 Ph., 230/460V) List Price: $8,059.00 Our Price: $6,559.99 You save $1,499.01!

The large 11-3/4" x 48" table on the OES9138 oscillating edge sander travels a full 8" in vertical height to accommodate most woodworking pieces. It will also tilt negative 5° and out to positive 45°. The cast iron platen is a generous 48" x 9-1/2" and covered with graphite for production sanding, offering super support and cooler running to extend belt life. With 24 oscillations per minute you can use the entire belt face without burning. A 3HP motor powers the belt and runs a large gearbox to provide the oscillating action. The entire head pivots on a massive shaft with two sealed ball bearings for trouble-free performance. Dual dust collection ports keep the work area clean and extend the life of your abrasive belt.