Swing away control box houses an e-stop and puts all controls at the operators fingertips

The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes

For added safety, the heavy-duty spindle break stops the spindle and interrupts the power, preventing accidental start-ups

The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories

CSA/CUS Certified

Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications

Spindle head is internally cooled extending bearing, belt and motor life

Table and ways are hardened up to 54 HRC and precision ground for greater accuracy

The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements

Swing away safety shield

LED work lamp

Chip pan

Dual locks on all moveable surfaces

Way covers

Drawbar

Tool box with tools

Spindle Taper (In. x TPI): R-8

Table Size (L x W) (In.): 10" x 50"

Quill Diameter (In.): 3-3/8"

Number of Spindle Speeds: Variable

Range of Spindle Speeds (RPM): 60 - 4,500 RPM

Quill Down Feed Rates (IPR): .015 - .003 - .006

Spindle Travel (In.): 5"

Head Movement (Deg.): 90° R & L, 45° F & B

Max Distance Spindle to Table (In.): 20-3/4"

Distance Spindle to Column (Max.) (In.): 26-3/4"

Distance Spindle to Column (Min.) (In.): 4-3/4"

Collet Capacity: 1/8" - 7/8"

Table Longitudinal Travel (In.): 35-1/3"

Table Longitudinal Travel With Powerfeed (In.): 29-7/8"

Table Cross Travel (In.): 14-3/4"

T-Slots Number and Size (In.): 3 and 5/8"

T-Slot Centers (In.): 2-1/2"

Work Table Weight Capacity (Lbs.): 840 Lbs.

Travel of Knee (In.): 16-1/8"

Travel of Ram (In.): 15-7/8"

Saddle Width (In.): 11-1/2"

Column Width (In.): 20"

Inverter Type: Delta, B

Motor (HP): 3HP, 230V, 3Ph

Overall Dimensions (L x W x H) (In.): 66" x 63" x 87"

Weight (Lbs.): 2,860 Lbs.