• Part Number 690940
• Motor 3 HP, 230/460V, 3Ph,
• Number of Spindle speeds Variable
• Spindle Taper R-8
• Quill Diameter (in.) 3-3/8
• Head Movement (deg.) 90° R & L, 45° F & B
• Max Distance Spindle to Table ( in.) 19
• Distance Spindle to Column (in.) 26
• Table Longitudinal Travel (in.) 30
• Table Cross Travel (in.) 15-1/4
• Collet Capacity 1/8– 7/8
• T-Slots Number and Size (in.) 3 and 5/8
• T-Slot Centers (in.) 2-1/2
• Work Table Weight Capacity (lbs.) 720
• Travel of Knee (in.) 14-1/4
• Travel of Ram (in.) 20-1/2
• 2-Axis CNC 690930
• 3-Axis CNC 690940
• CNC Package ACU-RITE MILLPWR®
• Quill Travel (in.) 5
• Quill Down feed Rates (IPR) .0015 – .003 – .006
• Range of Spindle Speeds (RPM) 70 – 3,800
• Table Size (in.) 10 x 50
• Distance Spindle to Column (min./in.) 5-1/2
• Feature 2 or 3 axes Control/ 3 axes Readout, significantly improves efficiency, productivity and profitability, may be used automatically or manually
• Feature Teach Position, use a tool, electronic edge finder or indicator to create a program from an existing part
• Feature Flexibility/Reduced setup time, eliminate repetitive and tedious setups
• Feature Edit Capabilities, edit program ssteps in groups or one at a time
• Feature ACU-RITE precision glass scales to provide better accuracy, repeatability, high resolutions (2um/.001"), fast slow speeds (40" per sec) and elimination of backlash compensation
• Feature Gound hardened ball screws, heavy-duty AC brushless servo motors, sturdy operator Feature, die-cast metal enclosures, sealed keypads and recessed interlocking lipseals
• Feature Feature FOR THE JTM-1050
• Feature Meehanite casting
• Feature Precision bored and honed milling head
• Feature Large diameter quill is chromed
• Feature High precision Class 7 spindle bearings
• Feature Spindle head is internally cooled
• Feature Satin chrome finished dials
• Feature Heavy-duty motor drive
• Feature One-piece quill pinion and shaft
• Feature Three-stage powet downfeed with automatic stop
• Feature Heavy-duty spindle brake
• Feature Chrome plated motor shaft with lower bearing support at end
• Feature Adjustable gibs throughout
• Feature Internal coolant tank built into base for use with coolant system (Coolant pump not included)
• Feature Tolerance test sheet included
• Feature Locks on all movable surfaces
• Feature Hardened and ground table
• Feature One-shot lubrication system
• Feature Way covers
• Feature Draw bar
• Feature Tool box with tools
• Feature Chrome lead scres on X and Y axis
• Feature Turcite B on X and Y axis
• Feature No fuse breaker power connection
• Feature Hardened and ground square vertical knee ways and cross ways
• Prewired 230V 3 HP, 230/460V, 3Ph, Prewired 230V
• Model Number JTM-1050CNC
• Brand Jet
• Overall Dimensions 95-3/4 x 68-3/4 x 87
• Height 87 inch
• Width 78 inch
• Length 95 inch
• Net Weight 2950 pound

Note:  Use of static phase converter will void warranty  

WARRANTY AND SERVICE:

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools.