The New JET 15” helical head planer quickly and quietly transforms rough lumber into smooth boards. This machine means business with a powerful 3 HP motor combined with a helical cutterhead housing 48 staggered carbide quick change knives. The innovative Precision Air Strut System (PASS™) provides consistent upward pressure on the cutterhead, reducing the chance of board snipe. The conveniently located two-speed gear box allows for quick and easy feed rate adjustments while removing up to 1/8-inch material with each pass for a smooth finish. A large Precision cast-iron table and infeed/outfeed tables make this planer a beautiful addition to the shop.

• Style (Type): Floorstanding Model
• Type of Cutterhead: Helical Head
• Cutterhead Speed (RPM): 5,200
• Cutterhead Diameter (In.): 2-5/8" (68mm)
• Cuts Per Minute: Continuous
• Number of Knives: 48
• Maximum Depth of Cut (In.): 1/8"
• Maximum Full Width Depth of Cut (In.): 1/8"
• Maximum Planing Width (In.): 15"
• Maximum Planing Thickness (In.): 6"
• Minimum Planing Length (In.): 5.6"
• Feed Rate (FPM): 16 and 20
• Number of Speeds: 2
• Table Size (L x W) (In.): 15 x 46.5 in.
• Table Size with Extensions (L x W) (In.): 15 x 49.2 in.
• Dust Collection Minimum CFM Required (CFM): 600 CFM
• Dust Port Outside Diameter (In.): 4" (102mm)
• Motor Power (HP): 3
• Motor Phase (PH): 1
• Motor Voltage (V.): 230
• Motor Amps: 15

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.